hardware – epm.jonhwilliams.com http://epm.jonhwilliams.com i build custom EPM systems that work Sat, 14 Jun 2014 16:59:34 +0000 en-US hourly 1 https://wordpress.org/?v=6.8.3 PERC H700 controller does recognize 4TB NAS hard drive http://epm.jonhwilliams.com/perc-h700-controller-recognize-4tb-nas-hard-drive/ http://epm.jonhwilliams.com/perc-h700-controller-recognize-4tb-nas-hard-drive/#comments Tue, 20 May 2014 20:35:20 +0000 http://epm.jonhwilliams.com/?p=315 Dell PERC H700 does not recognize Seagate NAS HDD 4TB SATA 6GB NCQ 64 MB Cache Bare Drive ST4000VN000

tested through PERC H700 Adapter BIOS Configuration Utility 2.02-0025.1
5/19/2014
Update 5/25/2014: If the drive cage is properly seated in the backplane both Seagate NAS HDD 4TB SATA 6GB NCQ 64 MB Cache Bare Drive ST4000VN000 and Western Digital WD40EFRX 4 TB WD Red, 3.5 inch, SATA III 5400 RPM 64 MB Cache Bulk/OEM NAS Hard Drive 4TB NAS drives are recognized.

The PERC H700 controller from Dell™ is in the third generation of Dell SAS RAID Cards and provides support for SAS, SATA and SSD (specifically SATA SSDs) drives.

The drives that might work are $900 each (Dell 4 TB 7200 RPM Near Line Serial Attached SCSI Hard Drive for Select Dell Poweredge Servers / PowerVault Storage) or $319 each from Amazon (Dell – 4TB 7.2K 6Gb/s 3.5″ SAS HD -Mfg # DTK38 (Comes with drive and tray))

steps

None.

description

None at this time

external links

None at this time


]]> http://epm.jonhwilliams.com/perc-h700-controller-recognize-4tb-nas-hard-drive/feed/ 1